Tryton
- Anorak style with full main zip
- Detachable membrane and liner
- Large ventilation panels on all sides
A 3-layer anorak-style jacket with an off-centred main zip that runs the full length, developed for adventure, sports, and naked bike riders in all conditions and seasons.
The Tryton jacket is developed from our innovative Bradical jacket, and the first 3-layer anorak-style jacket on the market. It features an off-centred main zip that runs the full length of the jacket and a large kangaroo pocket at the front.
It is suited for all seasons thanks to the detachable thermal liner in combination with the detachable Raintex ML membrane. The membrane is very comfortable on the skin as it is laminated against mesh fabric.
We’ve opted for discreet reflective Night Eye™ elements to make you better visible when it really matters. During the day, Night Eye™ is part of the fashionable design of your garment. At night, the microscopic dishes that cover the reflective back-layer will reflect light back to its source, making you stand out like a lighthouse on wheels.
Large 3D-mesh ventilation panels at the chest, back, and arms are fitted to ensure plenty of ventilation on warmer days. To make sure air is able to pass the body and cool it along the way, you can open up the air outlet at the back without having to take your jacket off.
Our new Quick Vent™ system features two buckles at the collarbones, which open up the air outlet when pulled. The buckles can be secured to the push buttons on the chest pockets to keep the outlet open.
The Tryton is prepared for the MUPBP-1 base plate to be attached to the back, which enables expansion of luggage capacity through modular gear such as our MUHB-1 hip bag.
This jacket comes with our very own Easy Cuff™; a system that makes use of a zip – instead of loops and snaps – to keep everything in place. This nifty spec connects the detachable layers to each other and prevents your hand, wrist or watch from getting stuck when putting on or taking off your jacket.
Other in-house developed differentiators are Belt Loop™ (to prevent your jacket from creeping up in case of a fall) and Dynamic Cuff™, which enables a better fit between sleeve and glove.
The hood can be zipped off or kept in place by the Hoodie Holder™, and the Water Exhaust™ prevents the jacket from getting soggy by dispersing water between the membrane and outer shell.
Our RISC™ level 1 impact protectors are present at the shoulders and elbows and easily accessible thanks to the Quick Pockets™. A RISC™ back protector is separately available and can easily be placed in the designated compartment. Be sure to check the size table before purchasing one.
The Tryton is what we call riding gear!
Specifications
Product information
Brand:
MACNA
MACNA
More than 30 years ago, we invented a new production method to make gloves more affordably waterproof. After this success, we launched our first jacket with the razor-sharp price/quality ratio you have come to know us for. Since then, we have always focused on innovation in motorcycle gear to contribute to a more enjoyable riding experience. MACNA - That's what we call riding gear!
Comfort:
Detachable liner
Detachable waterpoof membrane
Ventilation panels front
Ventilation zip chest
Side ventilation zip
Functionality:
Adjustable hip strap
Adjustable hip strap
Connects with pants
Connects with pants
Easily zip your pants to your jacket.Adjustable cuff
Adjustable cuff
Safety:
Short connection zipper
Short connection zipper
Jacket and pants can be connected by means of a short connecting zip.Adjustable elbow protection
Adjustable elbow protection
The position of the elbow protector can be adjusted to provide optimal comfort and impact protection. Depending on the garment, you can choose different pockets/positions, or you can place it exactly where you want in case of a velcro connection.
Prepared for back protector
Prepared for back protector
Place a back protector in the designated compartment.Shoulder protection
Shoulder protection
The shoulders are reinforced and well protected.Reflection
Reflection
Reflective panels at front and back.Style:
Casual - Urban
Suitable for:
Men
Technology:
Belt Loop™
Loop made of strong webbing to fix the jacket to the belt of your jeans.
Hoodie Holder™
Hoodie Holder™
Female part at the top of the back where the hood can hook itself into if you want to have it fixed instead of flapping in the wind.
Read more
P.A.L.S. base plate prepared
P.A.L.S. base plate prepared
This jacket is prepared for our P.A.L.S. base plate to be attached at the back, which in turn enables our MUHB-1 hip bag and other utility pouches to be attached and used.
Read moreDyna Cuff™
Dyna Cuff™
Softer, more dynamic cuff enables the sleeve to retract and adjust itself to the length of the wearer's arm. Great for riders who have short arms in relation to their bodies.
Read more
Easy Cuff™
Easy Cuff™
Comfy zip at the cuff - instead of loops and snaps - that connects the detachable membrane to the outer shell. Prevents loose, floating layers and your hand or foot from getting stuck.
Read more
Night Eye™
Night Eye™
Optimal visibility that hides in plain sight during the day. The microscopic dishes that cover the reflective back-layer reflect light back to its source, making you stand out like a lighthouse when it gets dark.
Read moreP.A.L.S.
P.A.L.S.
The Pouch Attachment Ladder System is a grid of webbing (25 x 38mm) used to attach smaller equipment onto load-bearing platforms such as backpacks, jackets, jeans and pants.
Read more
P.A.L.S. Hip bag prepared
P.A.L.S. Hip bag prepared
The MUHB-1 hip bag can be fitted on our utility P.A.L.S. base plate or MUBP-1 backpack in order to in crease baggage capacity.
Read more
Quick Pocket™ jacket
Quick Pocket™ jacket
Easily accessible pockets for protectors that enable quick placement or removal of protectors at the beginning or end of a stop, or when it’s time for a wash.
Read moreQuick Vent™
Quick Vent™
A large ventilation panel at the back of the jacket that’s quickly opened by pulling a pair of cords at the front. It can be compared to Venetian blinds you sometimes find in houses.
Raintex ML
Raintex ML
The breathable and waterproof Raintex membrane is laminated directly against mesh fabric, which feels comfortable on the skin and prevents the membrane from sticking to your skin when wearing sleeveless clothing underneath.
Read more
RISC™ back protector prepared
RISC™ back protector prepared
The construction features a designated compartment on the inside that enables our RISC back protector to be placed.
Read more
RISC™ knee/elbow protector (KE01, KE02, KE03)
RISC™ knee/elbow protector (KE01, KE02, KE03)
Impact protector with a hollowed-out, hexagonal structure that absorbs and distributes impact forces. Comfort is guaranteed by its ergonomic design and breathability.
Read more
Weather type:
All weather types
Cold
Mild
Hot
Ventilation:
Yes
Technical
Homologation:
RISC CE Level 1 elbow protection
RISC CE Level 1 elbow protection
Class AA
Class AA
RISC CE Level 1 shoulder protection
RISC CE Level 1 shoulder protection
Materials:
Calorite
Calorite
Heat resistant yarns or fabric treated with finish, making it high-temperature resistant.
Read more
Coated ripstop
Coated ripstop
Coated fabric with ripstop weave and reinforced yarns, which makes the fabric stronger and more resistant to tearing. The fabric has a matt coating which is waterproof.Cow leather
Cow leather
Cow leather is a strong and durable leather which retains its shape very well. It is strong, robust and has a fine regular structure.
Night Eye
Night Eye
Dark grey by day, luminous at night! The fabric is coated with lots of tiny dishes that reflect light back to its source - in your case; the traffic around you.
Ripstop 2mm
Ripstop 2mm
Strong and fine ripstop fabric with fine squared pattern texture with reinforced yarns, which makes the fabric stronger and resistant to tearing.Default
Product code:
165.3678
Adjustable elbow protection
The position of the elbow protector can be adjusted to provide optimal comfort and impact protection. Depending on the garment, you can choose different pockets/positions, or you can place it exactly where you want in case of a velcro connection.
Hoodie Holder™
Female part at the top of the back where the hood can hook itself into if you want to have it fixed instead of flapping in the wind.
Read more
P.A.L.S. base plate prepared
This jacket is prepared for our P.A.L.S. base plate to be attached at the back, which in turn enables our MUHB-1 hip bag and other utility pouches to be attached and used.
Read more
Dyna Cuff™
Softer, more dynamic cuff enables the sleeve to retract and adjust itself to the length of the wearer's arm. Great for riders who have short arms in relation to their bodies.
Read more
Easy Cuff™
Comfy zip at the cuff - instead of loops and snaps - that connects the detachable membrane to the outer shell. Prevents loose, floating layers and your hand or foot from getting stuck.
Read more
Night Eye™
Optimal visibility that hides in plain sight during the day. The microscopic dishes that cover the reflective back-layer reflect light back to its source, making you stand out like a lighthouse when it gets dark.
Read more
P.A.L.S.
The Pouch Attachment Ladder System is a grid of webbing (25 x 38mm) used to attach smaller equipment onto load-bearing platforms such as backpacks, jackets, jeans and pants.
Read more
P.A.L.S. Hip bag prepared
The MUHB-1 hip bag can be fitted on our utility P.A.L.S. base plate or MUBP-1 backpack in order to in crease baggage capacity.
Read more
Quick Vent™
A large ventilation panel at the back of the jacket that’s quickly opened by pulling a pair of cords at the front. It can be compared to Venetian blinds you sometimes find in houses.
Raintex ML
The breathable and waterproof Raintex membrane is laminated directly against mesh fabric, which feels comfortable on the skin and prevents the membrane from sticking to your skin when wearing sleeveless clothing underneath.
Read more
RISC™ back protector prepared
The construction features a designated compartment on the inside that enables our RISC back protector to be placed.
Read more
RISC™ knee/elbow protector (KE01, KE02, KE03)
Impact protector with a hollowed-out, hexagonal structure that absorbs and distributes impact forces. Comfort is guaranteed by its ergonomic design and breathability.
Read more
